Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Oil Pan: Service and Repair
Installation
INSTALLATION
NOTE: Oil pan sealing surfaces must be free of grease or oil.
NOTE: Parts must be assembled within 10 minutes of applying RTV.
1. Apply Mopar(R) Engine RTV GEN II at the front cover to engine block parting lines (1).
2. Apply a 2 mm bead of Mopar(R) Engine RTV GEN II around the oil pan as shown.
3. Position oil pan and install bolts. Tighten bolts to 12 Nm (105 in. lbs.).
NOTE: The 2 long bolts must be tightened to 22 Nm (195 in.lbs.).
