Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Air Duct: Service and Repair
Removal
BEVERAGE COOLER
NOTE: LHD model shown. RHD model similar.
1. Remove the instrument panel top cover (1).
2. Disconnect the hose (2) from the beverage cooler outlet (3).
3. To disengage the four retaining tabs (4), slide the beverage cooler outlet toward the center of the cover and remove the outlet.
Installation
BEVERAGE COOLER
NOTE: LHD model shown. RHD model similar.
1. Position the beverage cooler outlet (3) to the top of the storage bin and engage the four retaining tabs (4) by sliding the outlet toward the center of
the instrument panel top cover (1). Make sure the tabs are fully engaged.
2. Connect the hose (2) to the beverage cooler outlet.
3. Install the instrument panel top cover.
Removal
