Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
door opening. Engage screen into two bottom mount holes only (Fig. 3) and (Fig. 4).
20.
Position the particulate air filter cover to the HVAC housing and engage the two retaining tabs that secure the cover to the housing. Make sure the
retaining tabs are fully engaged (Fig. 2).
21.
Install the glove box.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.