Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
1. Remove the HVAC housing assembly and place it on a workbench.
2. If equipped, remove the particulate air filter.
3. Remove the four screws (1) that secure the air inlet housing (2) to the top of the HVAC housing (3).
4. Disengage the two plastic retaining tabs (4) that secure the air inlet housing to the HVAC housing and remove the inlet housing from the HVAC
housing.
5. If required, disassemble the air inlet housing.
Air Inlet Housing Installation
HOUSING-AIR INLET
NOTE: LHD model shown. RHD model similar.
