Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
4. Slide the notched end of the housing into the mounting hole far enough to engage the lens hinge/retainer (3) into the opposite side of the hole in
the headliner.
5. Gently and evenly press the lens hinge/retainer end of the lamp into the mounting hole until the bezel of the lamp housing is flush with the
headliner.
6. Swing the notched end of the lamp lens (2) into position against the lamp housing, then press on the lens firmly and evenly until it snaps into the
housing.
7. Reconnect the battery negative cable.
Bulb - With Flashlight Feature
BULB - WITH FLASHLIGHT FEATURE
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
NOTE: There are two types of cargo lamps available in this vehicle; one with and one without a removable flashlight feature.
1. Align the ends of the bulb (3) with the two bulb holders within the cargo lamp housing (2).
2. Carefully press the bulb firmly and evenly into the bulb holders until it snaps into place.
3. Position the curved edge of the lens (1) into position against the housing, then press upward on the straight edge of the lens firmly and evenly until
it snaps into the housing.
4. Reinstall the flashlight into the cargo lamp housing.
5. Reconnect the battery negative cable.
Bulb - Without Flashlight Feature
BULB - WITHOUT FLASHLIGHT FEATURE
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
NOTE: There are two types of cargo lamps available in this vehicle; one with and one without a removable flashlight feature.