Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
5. Remove the push pin (2) and unhook (1) the rear tether (3) from the D-pillar.
6. Remove the bolts (2) that secure the curtain airbag (3) to the spring nuts in the roof side rail (4).
7. The curtain airbag will be held in place with push pins (1). Release the push pins and remove bag (3) from vehicle.
Installation
INSTALLATION
NOTE: When replacing a curtain airbag because of deployment, the headliner must be replaced as well, including any damaged interior components.
1. Position the curtain airbag in vehicle along roof side rail (4) and install by fastening to roof side rail with integral push fasteners (1).
2. Install the bolts (2) holding the curtain to the roof side rail. Tighten bolts to 8 Nm (71 in. lbs.).
