Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Seat Belt: Service and Repair
Rear Center Seat Belt Retractor
Removal
REMOVAL
1. If center rear seatbelt (1) is latched to its anchor, detach the Quick Connect Anchor by depressing tab (2).
2. If seatbelt is unlatched from its anchor then remove it from its stowage slot on the right quarter trim panel.
3. Remove C-pillar upper trim panel (1).
4. Feed seatbelt webbing through C-pillar upper trim panel.
5. Remove the rear center seatbelt upper turning loop bolt (2).
