Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
5. Remove the bolt (4) attaching the turning loop to the belt height adjuster (2).
6. Remove upper B-pillar trim (3) and lower B-pillar trim panels.
7. Using a trim stick or equivalent, gently pry the seatbelt webbing guide from the B-pillar (1).
8. Remove anchor bolt (6) from lower B-pillar (1).
9. Disconnect electrical connectors. One is for the tensioner squib (2) and the other is for the seat belt switch (3).
10. Remove front seat belt retractor (1) from vehicle.
Installation
INSTALLATION
