Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Tire Pressure Sensor: Service and Repair
Removal
REMOVAL
1. Raise and support vehicle.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
CAUTION: The cap used on this valve stem contains an O-ring seal to prevent contamination and moisture from entering the valve stem.
Retain this valve stem cap for reuse. Do not substitute a regular valve stem cap in its place.
CAUTION: The valve stem used on this vehicle is made of aluminum and the core is nickel plated brass. The original valve stem core
must be reinstalled and not substituted with a valve stem core made of a different material. This is required to prevent corrosion in the
valve stem caused by the different metals.
