Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
6. Remove the routing clip (1) securing wheel speed sensor cable to the knuckle (4).
7. Remove the screw (2) fastening the wheel speed sensor head (3) to the knuckle (4). Pull the sensor head out of the knuckle.
8. Remove the nut (2) attaching the outer tie rod (7) to the knuckle (3). To do this, hold the tie rod end stud with a wrench while loosening and
removing the nut with a standard wrench or crowfoot wrench.
9. Release the outer tie rod end (3) from the knuckle (2) using Remover (1), Special Tool 9360.
10. Remove the outer tie rod from the knuckle.
