Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Steering Wheel: Service and Repair
Removal
REMOVAL
WARNING:
-
Do not place a non-deployed airbag face down on a hard surface. The airbag will propel into the air if accidentally deployed, and
could result in serious or fatal injury.
-
Disconnect and isolate the battery negative (ground) cable before beginning steering wheel removal or installation. This will disable
the airbag system. Failure to disconnect the battery could result in accidental airbag deployment and possible personal injury.
-
Allow the airbag system capacitor to discharge for two minutes before removing the steering wheel or any airbag system component.
1. Adjust the steering wheel so that the tires are in the STRAIGHT-AHEAD position.
2. Disconnect and isolate the battery negative cable.
3. Remove the driver airbag (3).
