Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
1. Disconnect and isolate the battery negative cable.
2. Remove the fasteners that secure the spoiler (3) to the liftgate outer panel (1).
3. Pull the spoiler away from the liftgate far enough to access and disconnect the liftgate washer supply hose (2) from the barbed nipple on the back
of the rear washer nozzle (4).
4. From the back of the spoiler, depress the two integral latch features of the nozzle, while pulling the nozzle out through the face of the spoiler.
