Caravan L4-153 2.5L SOHC (1989)
FIGURE 1
FIGURE 2
2.
Bend the bottom end of the dipstick blade up 10 degrees as shown in the Figure 1. Use the line drawing in Figure 2 as a guide to ensure the 10
degree angle is achieved.
3.
Insert the dipstick in the fill tube, start engine, check and adjust the transaxle fluid level as required.
NOTE:
THE WORDING "TRANS FLUID" ON THE DIPSTICK HANDLE MUST BE FACING UPRIGHT WHEN INSERTING
THE DIPSTICK.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No. 21-75-17-90
. . . . . . . . . . .
0.2 Hrs.
FAILURE CODE:
06 - Bent