Caravan L4-153 2.5L SOHC (1989)
Constant Velocity Joint: Service and Repair
Outer CV Joint Service
Disassembly
Driveshaft assembly should be identified before starting service procedure. Refer to SYSTEM I.D..
Fig. 7 Driveshaft components
1.
Remove boot clamps, then pull back boot to gain access to joint.
2.
Clean grease from joint.
Fig. 16 Removing outer CV joint from shaft
3.
On all models except S.S.G. units, place driveshaft assembly in suitable vise and support outer joint. Remove outer joint from shaft by tapping
top of joint body with a soft hammer.
4.
Remove circlip from shaft groove and discard.