Caravan L4-153 2.5L SOHC VIN K FI (1987)
Brake Shoe: Service and Repair
Brake Shoe Removal and Installation
Removal
For additional information see Notes, Warnings, and Hints.
Fig 1 Rear Wheel Brake
Fig 2 Removing And Installing Shoe Return Springs
TIP: Unless you are very familiar with this rear brake system you should consider servicing one side at a time. This will leave you an example of how
the pieces go back together.
1. Remove rear wheel, and hub and drum assembly.
2. Using tool C-3785 or equivalent, remove brake shoe return springs.
NOTE: For additional information see Brake Spring Removal and Installation Notes.
NOTE: The secondary shoe return spring overlaps the primary shoe return spring.
3. Slide the eye of automatic adjuster cable off anchor and then unhook from adjusting lever.
4. Remove cable, overload spring, cable guide and anchor plate.
5. Disengage adjusting lever from spring by sliding forward to clear pivot, then working out from under spring.