Caravan L4-153 2.5L SOHC VIN K FI (1987)
6. Position dust boot in counterbore. Using a hammer and Tool C4842 with C4171 handle or equivalent, drive boot into counterbore.
Fig 16 Installing Bushings
7. Compress flanges of guide pin bushings in with fingers and work into position by pressing IN on bushings, using fingertips or plastic trim stick
until seated.
8. Be sure flanges extend over caliper casting evenly on both sides.
9. Before installing caliper assembly on vehicle, inspect braking disc.
10. Install brake hose to caliper using new seal washers.
11. Bleed the brake system.