dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Cruise Control > < Vacuum Servo Motor & Reservoir Test
Page 1
background image

Cruise Control Vacuum Reservoir: Testing and Inspection
Vacuum Supply Test

1. Disconnect vacuum hose from servo on all except 1986-87 Mini-Vans/Wagons, or from vacuum reservoir on 1986-87 Mini-Vans/Wagons, then

install a suitable vacuum gauge into hose.

2. Start engine and run at idle. Vacuum gauge should read 10 inches of Hg.
3. If vacuum gauge reads below 10 inches of Hg, check for vacuum leaks or poor engine performance.

Relays and Modules - Cruise Control > < Vacuum Servo Motor & Reservoir Test