Caravan L4-2.4L VIN B (2003)
Power Door Lock Actuator: Service and Repair
SLIDING DOOR LOCK MOTOR
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove sliding door trim panel.
3. Remove sound pad as necessary.
4. Remove latch/lock control cover.
5. Remove latch/lock control.
Sliding Door Lock Motor
6. Remove screws holding door lock motor to latch/lock control.
7. Remove lock motor from control.
INSTALLATION
1. Position the lock motor on the latch/lock.
2. Install the screws retaining the motor to the latch/lock.
3. Install the latch/lock control.
4. Install the latch/lock control cover.
5. Install the sound pad and trim panel to the sliding door.
