Caravan L4-2.4L VIN B (2003)
Brake Pedal Assy: Service and Repair
PEDAL TORQUE SHAFT - RHD
REMOVAL
1. Remove the instrument panel.
2. Remove the HVAC housing.
3. Remove the retaining clip at the torque shaft end of the brake pedal-to-torque shaft link. Remove the link from the torque shaft. Discard the
retaining clip. It is not to be reused. Replace with a new clip when reassembled.
4. Locate the booster input rod-to-brake pedal torque shaft connection and remove the retaining clip. Discard the retaining clip. It is not to be reused.
Replace with a new clip when reassembled.
5. Remove the four (4) brake booster retaining nuts from inside the passenger compartment.
6. Remove the retaining nut from the brake booster bracket located above the booster in the engine compartment.