Caravan L4-2.4L VIN B (2003)
4. Align flat on balance shaft drive sprocket to the flat on crankshaft (Fig. 133).
Fig.134
5. Install balance shaft drive sprocket on crankshaft using Special Tool 6052 (Fig. 134).
Fig.135
6. Turn crankshaft until number 1 cylinder is at Top Dead Center (TDC). The timing marks on the chain sprocket should line up with the parting line
on the left side of number one main bearing cap. (Fig. 135).
7. Place chain over crankshaft sprocket so that the plated link of the chain is over the number 1 cylinder timing mark on the balance shaft crankshaft
sprocket (Fig. 135).
