Caravan L4-2.4L VIN B (2003)
Drive Belt: Service and Repair
Alternator/Generator Belt
REMOVAL - GENERATOR AND AIR CONDITIONING BELT
1. Raise vehicle on hoist.
Fig.8
2. Remove the drive belt shield (Fig. 8).
WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL
INJURY COULD RESULT.
Fig.4
3. Position a wrench on the belt tensioner lug (Fig. 4).
4. Release belt tension by rotating the tensioner clockwise (Fig. 4).
5. Remove belt.
1. Carefully return tensioner to its relaxed position.
CLEANING
Clean all foreign debris from belt pulley grooves. The belt pulleys must be free of oil, grease, and coolants before installing the drive belt.
INSPECTION
Belt replacement under any or all of the following conditions is required:
^
Excessive wear
^
Frayed cords