Caravan L4-2.4L VIN B (2003)
Fig. 31
4. Remove upstop switch by depressing four (4) plastic wing tabs, and sliding switch through mounting bracket. If necessary remove mounting
bracket and remove switch (Fig. 31).
INSTALLATION
1. Install upstop switch into bracket (Fig. 31). Ensure switch wing tabs are fully expanded. If removed, re-install bracket and torque to 13 Nm (115
in. lbs.).
2. Connect upstop switch connector.
3. Install knee bolster (Fig. 30).
4. Install instrument panel lower silencer (Fig. 29).
5. Connect battery negative cable.
