Caravan L4-2.4L VIN B (2003)
Fig. 25
4. Disconnect interlock switch connector (Fig. 25).
5. Remove interlock switch by depressing four (4) plastic wing tabs, and sliding switch through mounting bracket (Fig. 25). If difficulty is
encountered gaining access to and removing interlock switch, removing the upstop switch/bracket assembly (Fig. 25) allows for over-travel of the
pedal, giving more room for interlock switch access.
6. Remove interlock switch harness from pedal bracket at retainer. Remove switch.
INSTALLATION
Fig. 28
1. Install interlock switch into pedal bracket hole, and secure harness with retainer as shown in (Fig. 28). Make sure switch wing tabs are fully
expanded.
2. Connect interlock switch connector.
3. Install knee bolster (Fig. 24).
