Caravan L4-2.4L VIN B (2003)
10. On both sides of vehicle, remove nut attaching outer tie rod end to steering knuckle. Remove nut by holding tie rod end stud with a socket while
loosening and removing nut with wrench.
11. Remove both tie rod ends from steering knuckles using Puller, Special Tool C-3894-A.
12. Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing.
NOTE: The bolts fastening the cradle crossmember reinforcement are of two different thread sizes. Note the location of the various sizes.