Caravan L4-2.4L VIN B (2003)
Clutch Master Cylinder: Service and Repair
Master Cylinder - RHD
MASTER CYLINDER / REMOVAL - RHD
1. Disconnect battery negative cable.
2. Remove master cylinder to clutch pedal pin retainer clip. Disengage pushrod from clutch pedal pin (Fig. 13).
3. Disengage master cylinder grommet from cowl panel.
4. Remove battery and tray.
5. Diesel models: Remove windshield wiper module assembly.
6. Discharge Air Conditioning system.
7. Remove suction/discharge line from evaporator junction block.
8. Using tool 6638A, disconnect clutch hydraulic "quick-connect" fitting (Fig. 12).
9. Remove clutch master cylinder tubing from retainers in engine compartment.
10. Remove clutch master cylinder from dash panel/clutch pedal bracket by rotating 45° clockwise and pulling outward towards engine (Fig. 13).
11. Carefully guide clutch master cylinder and hydraulic plumbing from engine compartment.
INSTALLATION
