dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Oil Pump, Engine|Service and Repair|Page 974 > < Oil Pressure Warning Lamp/Indicator|Description and Operation|Page 970
Page 1
background image

Oil Pump: Service and Repair

REMOVAL

Fig. 27  Oil Pump Rear Cover Removal

NOTE: Oil pan must be removed prior to removing oil pump.

1.  Refer to ``Timing Belt, Replace,'' and remove timing belt as outlined.
2.  Remove timing belt tensioner and crankshaft sprocket.
3.  Remove oil pump assembly attaching bolts, then the oil pump.
4.  Remove oil seal from oil pump housing.

INSPECTION

Fig. 18 Oil pump clearance check locations

1.  Check oil pump case for cracks and damage.
2.  Using a suitable feeler gauge, measure the following clearances as follows:

a.  Body .............................................................................................................................................................  0.004-0.007 inch (0.10-0.18 mm).
b.  Side ..........................................................................................................................................................  0.0015-0.0035 inch (0.04-0.09 mm).
c.  Inner rotor to case ........................................................................................................................................  0.001-0.002 inch (0.03-0.07 mm).

Oil Pump, Engine|Service and Repair|Page 974 > < Oil Pressure Warning Lamp/Indicator|Description and Operation|Page 970