dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Cable - Buck, Surge, & Spark Knock|Page 3115 > < Battery Cable - Buck, Surge, & Spark Knock|Page 3113
Page 3
background image

FIGURE 3-A - 114 AMP ALTERNATOR

4.

Vehicles With 114 AMP Alternators

Remove and discard the alternator ground wire. Figure 3 illustrates both 6 and 8 cylinder applications. Attach the eyelet of the new battery
ground cable to the alternator ground stud. Secure with the nut previously removed and torque this nut to 20 inch pounds.

FIGURE 3-B - 60 AND 78 AMP ALTERNATOR

5.

All Applications Except 114 AMP Alternator

Locate the eyelet of the battery ground cable near the hold on the rear of the alternator next to the raised letters "GRD". Secure the eyelet by
using the supplied self-tapping screw, PN 6033516, and torque to 60 inch pounds (Figure 3-B).

6.

Attach the new negative battery cable to the battery.

7.

Road test vehicle to be certain the condition has been corrected.

Battery Cable - Buck, Surge, & Spark Knock|Page 3115 > < Battery Cable - Buck, Surge, & Spark Knock|Page 3113