dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Campaign - Front Hub Attaching Bolts Omitted|Page 3410 > < Campaign - Front Hub Attaching Bolts Omitted
Page 1
background image

Wheel Bearing: Adjustments

Fig. 3 Wheel bearing assembly

1. Raise and support rear of vehicle.
2. Torque adjusting nut to 270 inch lbs. while rotating wheel.
3. Stop wheel and loosen adjusting nut.
4. Tighten adjusting nut finger tight. End play should be 0.0001 - 0.0020 inch.
5. Install castle lock with slots aligned with cotter pin hole.
6. Install cotter pin and grease cap.

Campaign - Front Hub Attaching Bolts Omitted|Page 3410 > < Campaign - Front Hub Attaching Bolts Omitted