Caravan V6-181 3.0L VIN 3 FI (1988)
Brake Pad: Service and Repair
Removal and Installation
Removal
For additional information see Removal Notes. See: Brake Caliper/Fundamentals and Basics
Fig. 1 Dual Pin Brake Caliper
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove front wheel and tire assemblies.
3. Loosen, do not remove caliper guide pins until caliper is free.
4. Remove guide pins only if bushings or sleeves are to be replaced.
Removing Caliper And Brake Shoes As An Assembly
5. Pull lower end of the caliper out from the steering knuckle and roll caliper out and away from braking disc.
-
The shoe assemblies will remain with the caliper.
