dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Firing Order > < A/T - Harsh or Abrupt Engagement Into Drive|Page 628
Page 1
background image

Fuel Pressure Release: Service and Repair

1. Loosen gas cap and allow tank pressure to release.
2. Remove wiring harness connector from any injector, then ground one injector terminal.
3. Connect a suitable jumper wire to a second terminal, then touch the positive post of the battery for approximately 10 seconds and release system

pressure.

4. Remove jumper wires and service fuel system as required.

Firing Order > < A/T - Harsh or Abrupt Engagement Into Drive|Page 628