Caravan V6-201 3.3L (1995)
5. If equipped, engage wire connector into accessory power outlet.
6. Install screws to hold rear edge of quarter trim to support bracket.
7. Install screws to hold quarter trim to quarter panel in bolster area.
8. Install screws to hold quarter trim to quarter panel in B-pillar area.
9. Install screw to hold quarter trim to quarter panel above front seat belt retractor.
10. Install left front seat belt opening bezel into quarter trim.
11. Install second rear seat belts anchors.
12. Install first rear seat belt anchors.
13. Install left D-pillar trim panel.
14. Install upper left B-pillar trim.
15. Install left quarter trim bolster.
16. Install front door sill plate.
17. If equipped, install second rear seat.
18. Install first rear seat.
19. Connect the negative cable clamp to the battery post.
Liftgate Sill Plate
Liftgate Sill Plate
REMOVAL
1. Disengage hidden clips holding sill plate to liftgate door opening sill.
2. Separate sill plate from vehicle.
INSTALLATION
1. Place sill plate in position on vehicle.
2. Align locator rib into recess in liftgate sill.
3. Engage hidden clips to hold sill plate to liftgate door opening sill.
Lower A-Pillar Extension Trim
A-Pillar Extension Trim
REMOVAL
1. Remove instrument panel side cover.
2. Remove screw holding A-pillar extension to door hinge pillar.
3. Separate A-pillar extension trim from vehicle.
