Caravan V6-201 3.3L (1995)
Installing Caliper Guide Pin Bushing
b. Using your fingers insert the folded bushing into the caliper assembly. Making sure the solid section of the bushing is fully seated into the
bushing hole of the caliper assembly. Do not use a sharp object to perform this step due to possible damage to the bushing.
Bushing Correctly Installed In Caliper
c. Unfold the bushing using your fingers or wooden dowel until the bushing is fully seated into the caliper assembly with the flanges seated
evenly on both sides of the bushing holes in the caliper assembly.
Fig 7 Installing Caliper Sleeves
Guide Pin Sleeve Installation
a. Install the sleeve into one end of the bushing until the seal area of the bushing is past the seal groove in the sleeve.
