Caravan V6-201 3.3L (1995)
Radiator Cooling Fan Motor: All Technical Service Bulletins
Cooling Module Fan - Vibrates/Comes Loose
NO: 07-06-98
GROUP: Cooling
DATE: Nov. 20, 1998
SUBJECT:
Cooling Module Fan Nut
MODELS:
1993 - 1995 (AS) Town & Country/Caravan/Voyager
1993 - 1995 (ES) Chrysler Voyager (International Market)
DISCUSSION:
Some subject vehicles may experience a loosening or loss of the nut retaining the engine cooling module fan causing a vibration initially. If not
addressed promptly, the fan blade will not turn and the engine may overheat.
A revised engine cooling module fan retaining nut kit has been released, p/n 05011946AA, to address this condition and should be used for repair any
time this condition is experienced and the fan blade is not damaged.
The cooling fan blade and motor were balanced as an assembly at the time of manufacture and must be properly oriented to minimize vibration. The
cooling fan blade can be installed on the cooling motor shaft in one of two positions. If the cooling fan blade/motor assembly vibrates excessively after
replacing the nut, remove and reinstall the cooling fan blade on the motor shaft 180 degrees from the first installation position.
The proper torque for the revised fan retaining nut is 6.3-7.3 Nm (55-65 in. lbs.).
POLICY: Information Only
