Caravan V6-201 3.3L (1995)
14. Loosen the instrument panel roll up bolts.
15. Remove the six screws securing the instrument panel at the fence line.
16. Roll the instrument panel back and hang it from the short position of the roll up hook.
17. With instrument panel hanging in the short position disconnect the left side body wiring connections.
18. Roll the instrument panel to the long position on the roll up hook and perform the following operations:
-
Disconnect the antenna cable.
-
Disconnect the blower motor lead connection.
-
Disconnect the temperature control cable from the A/C or heater unit.
-
Disconnect the vacuum lines from the climate control assembly
-
Disconnect the right side body wiring connectors.
19. Remove instrument panel from vehicle.
20. Disconnect the A/C unit hanger strap from the unit and temporarily reposition.
21. Remove the rubber condensate drain tube (in engine compartment).
22. Remove the four nuts (in the engine compartment) securing the unit to the dash panel.
23. Pull the entire unit rearward until the studs on the unit clear the dash panel. Drop the unit down. Pull it rearward to remove it from vehicle.
DISASSEMBLY
1. Place heater A/C unit assembly on workbench.
2. Remove one screw at the vacuum harness. Feed harness through hole in cover.
3. Remove thirteen screws from top cover and remove cover. Temperature control door will come out with the cover. Remove the nut and lever from
the door shaft to remove the temperature door from the cover.
Heater Core
4. Remove screw from heater core tube retaining bracket and lift heater core out of unit.
