dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Throttle Position Sensor|Locations > < Diagram Information and Instructions|Page 4282
Page 1
background image

Throttle Position Sensor: Specifications

 

THROTTLE POSITION ....................................................................................................................................  INCREASE IN TPS VOLTAGE

   

10°  Closed Throttle*   .......................................................................................................................................................     0 volts        

20°                     ..................................................................................................................................................................  0.38 volts        

30°                     ..................................................................................................................................................................  0.75 volts        

45°  Half Throttle      ........................................................................................................................................................  1.31 volts        

58°                     ................................................................................................................................................................  1.80 volts**      

75°                     ...............................................................................................................................................................  2.43 volts***     

90°  Wide Open Throttle ..................................................................................................................................................  3.00 volts        

*

At idle position the throttle blade is open 10°. The throttle blade is rotated 80° when the throttle is moved from the idle position to the "wide open"
position, .

**

The PCM recognizes a TPS voltage rise of 1.80 volts or more over idle position voltage as "Wide Open Throttle" (WOT).

***

If the TPS voltage sensed at the PCM rises 2.43 volts or more above idle position voltage, the PCM shuts off fuel injection.

  

Throttle Position Sensor|Locations > < Diagram Information and Instructions|Page 4282