dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Injector Cleaning Procedure|Page 4572 > < Fuel Injector Cleaning Procedure
Page 1
background image

Fuel Injector: Service and Repair
Fuel Injector Replacement

Fuel Injector Removed

Fuel Injector Installation

WARNING:  The fuel system is under constant pressure, even when the engine is OFF. Always release fuel pressure before servicing any fuel
system component.
 

REMOVAL

1. Release fuel system pressure.  
2. Disconnect the negative battery cable and remove the fuel rail.  
3. Disconnect the wiring connector from the fuel rail to the injector.
4. Remove the fuel injector lock clip, and slide the injector straight out of the fuel rail cup.
5. Check each injector O-ring for damage and replace any damaged O-rings prior to installation. If the injector is to be re-used,  place a protective

cap over the injector tip, while it is removed.

Fuel Injector Cleaning Procedure|Page 4572 > < Fuel Injector Cleaning Procedure