dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Inadvertent Airbag Deployment|Page 8493 > < Recall - Inadvertent Airbag Deployment|Page 8491
Page 13
background image

12.

Install the lower steering column cover (Figure 1).

13.

Connect the liftgate release switch electrical connector (Figure 1).

14.

Connect the liftgate release switch electrical connector (Figure 1).

15.

Tighten the lower instruments panel cover screws securely.

16.

Remove the two (2) screws that attach the lower console to the instrument panel support brackets (Figure 9).

17.

Slide the cupholder out.

18.

Remove the two (2) upper console attaching screws behind the cupholder (Figure 9).

19.

Slide the console rearward and up to remove.

20.

Inspect the I/P wiring harness where it connects to the Airbag Electronic Control Module (AECM) (Figure 10). Any chafed or cut wires should be
repaired per the Wiring Repair Procedure.

Recall - Inadvertent Airbag Deployment|Page 8493 > < Recall - Inadvertent Airbag Deployment|Page 8491