Caravan V6-201 3.3L (1995)
Low Pressure Sensor / Switch: Service and Repair
Low Pressure Cycling Clutch Switch Replacement
Electronic Cycling Clutch Switch Combo Valve (ECCS)
REMOVAL AND INSTALLATION
1. Disconnect the 3 pin connector at the ECCS.
2. Remove 4 mm hex bolt from side of expansion valve.
3. Slip the capillary tube from the well on the expansion valve. The capillary-tube-well is filled with a special temperature conductive grease. Save
this special grease and reuse it when installing the new switch.
To install, reverse the preceding operation.