Caravan V6-201 3.3L (1995)
Axle Shaft: Service and Repair
REMOVAL
1. Remove cotter pin, locknut and spring washer from wheel hub.
2. Loosen hub nut with brakes applied.
3. Raise and support vehicle, then remove wheel and tire assembly.
Fig. 18 Speedometer pinion removal
4. If removing right driveshaft, speedometer pinion must be removed prior to driveshaft removal.
5. Remove ball joint stud to steering knuckle clamp bolt, then separate ball joint stud from steering knuckle using a suitable pry bar.
CAUTION: Use caution not to damage ball joint or CV joint boots.
