dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sunroof / Moonroof Panel|Adjustments|Page 9127 > < Sunroof / Moonroof Module|Diagrams
Page 1
background image

Sunroof / Moonroof Panel: Adjustments

SUNROOF GLASS PANEL ADJUSTMENT

1. Move the sunshade rearward to the open position.
2. Move the sunroof glass panel to the fully closed position.
3. Loosen the forward attaching screws on each side enough to make the front of the glass to adjust up or down.
4. Adjust the front surface of the sunroof glass panel 0.00 - 1.75 mm (0.00 - 0.07 in.) below the top surface of the roof.

Fig.1 Sunroof Assembly

5. Tighten the front glass panel attaching screws to 3.5 Nm (31 in. lbs.) torque.
6. Loosen the rear screws on each side enough to make the rear adjustment.
7. Adjust the rear surface of the sunroof glass panel 0.00 - 1.75 mm (0.03 - 0.07 in.) above the top surface of the roof.
8. Tighten the rear glass panel attaching screws to 3.5 Nm (31 in. lbs)  torque.
9. Check for proper fit If not OK, repeat glass panel adjustment.

Sunroof / Moonroof Panel|Adjustments|Page 9127 > < Sunroof / Moonroof Module|Diagrams