dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Gauge Sender > < Fuel System - Difficult Fuel Fill/Nozzle Shuts Off|Page 3842
Page 2
background image

Fig. 22 Fuel Tube Vent Canister

6. Remove the canister from filler tube (Fig. 22). 
7. Disconnect the vent at the top of the filler tube. 
8. Remove the ground strap.
9. Remove filler tube at tank.

INSTALLATION

1. Install filler tube to tank (Fig. 20). 
2. Install the ground strap.
3. Connect the vent at the top of the filler tube. 
4. Install the 3 screws at the filler door.
5. Install the canister from filler tube (Fig. 22). 
6. Install the splash shield.
7. Install the left rear tire.
8. lower vehicle.
9. Connect the negative battery cable.

Fuel Gauge Sender > < Fuel System - Difficult Fuel Fill/Nozzle Shuts Off|Page 3842