dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - Harsh 4th - 3rd gear Downshifts|Page 4210 > < A/T - Delayed Gear Engagement/Harsh 4th-3rd Downshift|Page 4205
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
A/T - Harsh 4th - 3rd gear Downshifts

NUMBER: 21-006-03

GROUP: Transmission

DATE: June 6, 2003

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. THE MDS2 MUST BE OPERATING WITH CIS CD2135 OR HIGHER AVAILABLE
JUNE 23, 2003.

SUBJECT:
Transmission Harsh 4-3 Downshift

OVERVIEW:

This bulletin involves reprogramming the Transmission Control Module (TCM).

MODELS:
2003

(RG)

Chrysler Voyager (International Markets)

2003

(RS)

Town & Country/Caravan/Voyager

NOTE: 

THIS BULLETIN APPLIES TO RS/RG VEHICLES EQUIPPED WITH A 3.3L OR 3.8L ENGINE (SALES CODES EGA, EGH, OR EGM) AND
A 41TE TRANSMISSION (SALES CODE DGL).

SYMPTOM/CONDITION:

Vehicle may exhibit, after an extended soak (several hours), a harsh 4-3 downshift.

DIAGNOSIS:

Using a Scan Tool (DRBIII(R)) with the appropriate Diagnostic Procedures, verify all engine systems are functioning as designed. If DTCs are present
record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED

EQUIPMENT REQUIRED

REPAIR PROCEDURE:

1.

Check the transmission fluid level. If fluid level is full proceed to step 2. If fluid level is low, diagnose and repair fluid leak. Proceed to step 2.

NOTE: 

WHENEVER A PCM/TCM IS REPLACED OR REPROGRAMMED, THE SOFTWARE IN THE CONTROLLER AND DRBIII(R) MUST
BE VERIFIED AS HAVING THE LATEST REVISION LEVEL. IF A CONTROLLER SOFTWARE UPDATE FLASH IS AVAILABLE,

A/T - Harsh 4th - 3rd gear Downshifts|Page 4210 > < A/T - Delayed Gear Engagement/Harsh 4th-3rd Downshift|Page 4205