Caravan V6-3.3L VIN R (2003)
Seat Belt: Procedures
First Row Outboard - LWB Four Door
REMOVAL
1. Remove first and second row seats. Refer to Owner's manual for proper procedures.
2. Remove shoulder harness height adjuster knob by pulling it straight away from adjuster.
3. Slide floor anchor cover from over the anchor bolt.
4. Remove floor anchor bolt.
5. Remove anchor from floor.
6. Open clam shell cover from over seat belt turning loop.
7. Remove bolt attaching turning loop to shoulder belt height adjuster.
8. Remove turning loop from C-pillar.
9. Remove lower quarter trim panel.
10. Route seat belt webbing and turning loop through access hole in lower quarter trim panel.
11. Remove bolt attaching seat belt retractor to quarter panel.
12. Lift retractor upward and disengage arrow head retainer attaching retractor to quarter panel.
13. Remove seat belt from vehicle.
INSTALLATION
1. Position seat belt to vehicle.
2. Install arrow head retainer to quarter panel and push downward to seat retainer.
3. Install bolt attaching seat belt retractor to quarter panel.
4. Route seat belt webbing and turning loop through access hole in lower quarter trim panel.
5. Install lower quarter trim panel.
6. Position turning loop to C-pillar.
7. Install bolt attaching turning loop to shoulder belt height adjuster.
8. Close clam shell cover from over seat belt turning loop.
9. Position anchor to floor.
10. Install floor anchor bolt.
11. Slide floor anchor cover over the anchor bolt.
12. Install shoulder harness height adjuster knob by pushing it straight onto adjuster.
13. Install first and second row seats. Refer to Owner's manual for proper procedures.
NOTE: The tightening specification for all seat belt anchor bolts is 39 Nm (29 ft. lbs.) torque.
First Row Outboard - SWB Four Door
REMOVAL
1. Remove first and second row seats. Refer to Owner's manual for proper procedures.
2. Remove shoulder harness height adjuster knob by pulling it straight away from adjuster.
3. Slide floor anchor cover from over the anchor bolt.
