Caravan AWD V6-201 3.3L (1991)
completely release bearing preload. Finger tighten adjusting nut.
14.
Position nut lock with one pair of slots in line with cotter pin hole. Install cotter pin. The end play should be .025-mm. (.001-.003 in.). Clean and
install grease cap.
15.
Install wheel and tire assembly. Tighten wheel nut to 129 N-m (95 ft.lbs.) torque.
16.
Lower vehicle.
17.
Recheck alignment specifications.
The Chrysler Corporation recommended rear wheel specifications are:
(FOR PRIOR MODELS REFER TO APPLICABLE SERVICE MANUALS FOR SPECIFICATIONS)
POLICY:
Information only.
