dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Service Precautions|Page 9563
Page 3
background image

-

Headlight Lamp: Out The cluster will request a single chime after the indicator is illuminated.

-

Liftgate Ajar Lamp: The BCM determines when to chime for liftgate ajar.

-

Fasten Seat Belt Lamp: The BCM will request five chimes from the MIC when the ignition is turned to the unlock/run/start positions if the
driver seat belt is not buckled.

-

Check Engine Lamp: The cluster will request a single chime after the indicator is illuminated.

-

Low Washer Fluid Lamp: The cluster will request a single chime after the indicator is illuminated.

-

Engine Temperature Lamp: The cluster will request a single chime when the indicator is first illuminated at 252 °F / 122C.

Other Chime On Conditions

-

Bulb Check: The chime will sound three times during bulb check.

-

Programming of an Additional Key Fob: A double cluster chime will sound, which signals that the program mode has been initiated.

-

Programming for Rolling Door Locks: When the programming has been completed, a single tone from the chime system, will occur.

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Service Precautions|Page 9563