Caravan FWD L4-2.4L VIN B (1998)
Reading Park Brake Drum Diameter
6. Using a ruler that reads in 64th of an inch, accurately read the measurement of the inside diameter of the park brake drum from the special tool.
Setting Gauge To Park Brake Shoe Measurement
7. Reduce the inside diameter measurement of the brake drum that was taken using Special Tool C-3919 by 1/64 of an inch. Reset Gauge, Brake
Shoe, Special Tool C-3919 or the equivalent used, so that the outside measurement jaws are set to the reduced measurement.
Adjusting Park Brake Shoes
8. Place Gauge, Brake Shoe, Special Tool C-3919 or equivalent over the park brake shoes. The special tool must be located straight across at the
center (widest point) of the park brake shoes.
9. Using the star wheel adjuster, adjust the park brake shoes until the lining on the park brake shoes just touches the jaws on the special tool.
10. Install rotor on hub/bearing.
11. Rotate rotor to verify that the park brake shoes are not dragging on the brake drum. If park brake shoes are dragging, remove rotor and back off
star wheel adjuster one notch and recheck for brake shoe drag against drum. Continue with the previous step until brake shoes are not dragging on
brake drum.
12. Install disc brake caliper on caliper adapter.
