Caravan FWD L4-2.4L VIN B (1998)
Drive Belt: Service and Repair
Removal and Installation
A/C Belt
GENERATOR AND AIR CONDITIONING
Air Conditioning Compressor/Generator Belts 2.4L
1. Loosen lower generator pivot bolt and upper locking nut, then loosen adjusting bolt to remove belt tension.
CAUTION: Belt damage may occur if the following procedure is not performed.
2. Tighten lock nut to 21 Nm (180 inch lbs.) and torque generator pivot bolt to 54 Nm (40 ft. lbs.). To assure proper alignment of generator
assembly. Adjust belt tension by tightening the adjusting bolt until proper belt tension is obtained. Refer to tension specification in Belt Tension
Chart.
3. Torque lock nut to 54 Nm (40 ft. lbs.).
POWER STEERING PUMP
Power Steering Pump Adjustment
