dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blend Door Actuator Replacement|Page 6943 > < Blend Door Actuator Replacement|Page 6941
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Recirculation Air Door Actuator Replacement

REMOVAL

1. Pull back on carpeting on the right lower floor.
2. Remove Recirc door actuator connector.

Recirculation Door Actuator

3. Remove (3) mounting screws for Recirc actuator.
4. Remove Recirc actuator.
5. Disengage actuator linkage at Recirc door.
6. Remove actuator from vehicle.

INSTALLATION

1. For installation, reverse the above procedures.
2. Perform the HVAC control Calibration Diagnostic and Cool-down test.

Blend Door Actuator Replacement|Page 6943 > < Blend Door Actuator Replacement|Page 6941