dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Throttle Cable/Linkage|Service and Repair|Page 3868 > < Throttle Body Cleaning|Page 3864
Page 1
background image

Throttle Cable/Linkage: Service and Repair

Fig 60  Throttle Cable To Throttle Body Attachment

CAUTION:  When servicing the accelerator pedal, throttle cable or speed control cable, do not damage or kink the core wire inside the cable sheathing.

REMOVAL

1. Working from the engine compartment, hold the throttle body throttle lever in the wide open position.
2. Remove the throttle cable from the throttle body cam (Fig. 60), (Fig. 61) and (Fig. 62).

Fig 58  Accelerator Pedal And Throttle Cable -- Front View

3. From inside the vehicle, hold up the pedal and remove the cable retainer and throttle cable from the upper end of the pedal shaft (Fig. 58).

Fig 59  Accelerator Pedal And Throttle Cable -- Rear View

4. Remove retainer clip from throttle cable and grommet at dash panel (Fig. 59).
5. From the engine compartment, pull the throttle cable out of the dash panel grommet. The grommet should remain in the dash panel.

Throttle Cable/Linkage|Service and Repair|Page 3868 > < Throttle Body Cleaning|Page 3864