dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radio/Stereo > < CD Player - CD Compatibility
Page 1
background image

Compact Disc Player (CD): Service and Repair

Radio

REMOVAL

1. Remove HVAC switch bezel. 
2. Remove screws holding radio to instrument panel.

Radio Connectors

3. Pull radio rearward to gain access to back of radio.
4. Remove bolt holding ground strap to back of radio.
5. Disconnect antenna cable from back of radio.
6. Disconnect the wire connectors from back of radio.
7. Remove radio from vehicle.

INSTALLATION

1. Install radio from vehicle.
2. Connect the wire connectors from back of radio.
3. Connect antenna cable from back of radio.
4. Install bolt holding ground strap to back of radio.
5. Push radio forward to gain access of radio.
6. Tighten screws holding radio to instrument panel.
7. Install HVAC switch bezel. 

Radio/Stereo > < CD Player - CD Compatibility